Home/Blog/Marketing Automation/Find Dropped Handoffs: A One Week Method…
Marketing Automation

Find Dropped Handoffs: A One Week Method for Founders

How to find dropped handoffs: spend a week noticing where things fall through, write each one down, then rank them by how often they happen and what each costs.

Cover of the FIKR Space guide: Find Dropped Handoffs: A One Week Method for Founders

To find dropped handoffs, spend one week noticing where work falls between one step and the next, write each gap down as it happens, and rank the list by how often it recurs and how much it costs you. Do it from a week of observation, not from memory.

A dropped handoff is the moment when one step finishes and the next one is supposed to begin, but nobody starts it. It does not look like a failure while it is happening. It looks like an ordinary busy day. That is exactly why it has to be hunted deliberately, and why the list it produces is the best input you can give to any automation project.

How to find dropped handoffs before you build anything

Most failures in automation are failures of selection. People build the workflow that is easiest to build, or the one they have seen someone else describe, or a message they wish they were sending. None of these is the same as the gap that is actually costing them business. A week of noticing replaces all three guesses with evidence.

The week has a simple rule: you are not fixing anything yet. You are only recording. Fixing during the week changes the thing you are trying to observe, and it tempts you to solve the loudest problem rather than the most frequent one.

What a dropped handoff looks like

The pattern is almost always the same short list. Look for these in particular.

  • A new enquiry that waits too long for a first reply.
  • A lead who goes quiet and is never chased.
  • A deal that moves forward without the next task being created.
  • A new customer whose onboarding depends on someone remembering.
  • A promise made on a call that never turns into an action.

Each of these is a moment of intent that leaks away. Someone fills in a form on a Friday evening and nobody replies until Tuesday. A promising call ends with a promise to send something tomorrow, and tomorrow fills up. A deal reaches the proposal stage and no one is told to write the proposal. A customer pays, and the welcome they were promised depends on whether the founder remembers.

Free guide, 29 pages: The Automation Playbook. Send me the guide.

A week of noticing, in practice

You do not need a system for this. A single page or a note on your phone is enough, as long as you write the entry at the moment you notice it. The table below pairs each common gap with the question that exposes it.

The gapThe question that exposes itWhat the person on the other side experiences
Enquiry waits for a replyHow long did the first reply take?Silence, while someone else answers first
Lead goes quietWho was meant to chase them?Nothing at all, so they drift away
Deal moves without a taskDoes the next step exist as a task?A proposal that never arrives
Customer paysWho sends the welcome?A promise that depends on memory
Promise made on a callIs there an action for it?"Tomorrow" that never comes

Keep each entry short. A line is enough: what should have happened, what did happen, and who was supposed to make it happen. The third part matters most, because a handoff that depended on a person remembering to tell another person is the kind a rule can protect.

Rank the list by frequency and cost

At the end of the week you will have a list that is longer than you expected. Do not build from it in the order you wrote it. Rank each item on two questions: how often does it happen, and how much does each occurrence cost you?

How oftenHow costly each timeWhat to do with it
OftenHighStart here
OftenLowConsider a simple internal rule
RarelyHighKeep it on the list and watch it
RarelyLowLeave it for now

The first row of that table is the one that pays for itself immediately. In those places the alternative to automation is not a slightly worse version of the same step. It is nothing at all.

Why the week beats memory

Memory favours the dramatic. A single bad weekend stays with you for months, while a small gap that repeats every few days fades into the background because no single occurrence was bad enough to remember. A written record reverses that bias. It shows you the quiet, frequent leak next to the loud, rare one, and lets you compare them on the same page.

It also protects you from a second bias, which is to start with the process you find most interesting to automate. Interest in building a thing is not evidence that the thing is needed.

Separate the gap from the cause

Before you move on, look at each top item and ask why it dropped. Sometimes the reason is that nobody was told. Sometimes the step has no owner. Sometimes the step itself has never been defined, and people do it differently every time.

That last case is a warning. If you cannot describe what should happen in a few sentences, the handoff is not ready for a rule, because you would be automating a guess. The test is the one in how to decide what to automate first: do the process by hand until you know what a good outcome looks like, and only then write it down.

FIKR Hub: see FIKR Hub.

Turn the top items into sentences

Take the first one or two items and write each as a plain sentence in the form of an event, a check and a result. For example, using the guide's own wording: when someone submits the enquiry form, if they are not already a customer, assign them to me, create a task to reply within the working day, and send a short confirmation that a person will be in touch.

If that sentence comes easily, you have found a workflow. If it does not, you have found a process question, and it is better to learn that now than after you have built something in a visual editor. The event at the front of the sentence is the trigger, and choosing it well is its own skill: see how to choose a workflow trigger.

Common ways the week goes wrong

  • Relying on memory. At the end of the week you will remember the dramatic failures and forget the frequent small ones. The frequent small ones are where the money leaks.
  • Fixing as you go. If you patch each gap the moment you see it, you never learn which ones recur.
  • Listing messages instead of handoffs. "I should send more emails" is not a dropped handoff. It is a wish. A dropped handoff is a step that was due and did not happen.
  • Ignoring the internal ones. A task not created or an owner not assigned is invisible to the customer, which makes it easy to overlook, but these are often the cheapest and safest to fix first.
  • Counting only your own gaps. If a teammate also hands work on, ask them to keep the same page for the week.

What to do with the result

You now have a ranked list, and the top items are the places where a reliable rule will beat a well-meaning person on a busy week. You also have something less obvious: an honest picture of how your company really runs, which is often different from the version in your head.

The next decision is order. Not everything on the list should be automated, and not everything should be automated first. Some items are internal and safe, some would speak to customers, and some belong on the list of things that should always stay with a person. That last list deserves care, and what should you never automate explains how to draw it.

Free guide, 29 pages: The Automation Playbook. Send me the guide.

A checklist for the week

  • I recorded entries at the moment I noticed them, not at the end of the day.
  • Each entry says what should have happened, what did, and who was meant to do it.
  • I did not fix anything during the week.
  • I ranked the list by how often each gap happens and what each costs.
  • The top item is a gap in a step I already do reliably by hand.
  • I can write the top item as two or three plain sentences.
FIKR Hub: see FIKR Hub.

Frequently asked questions

Why a week and not a single day?

One day shows you whatever happened to go wrong that day. A week shows you what recurs, which is what a rule can actually fix.

What if I find only a few?

Then start with the most costly one. A small list is good news: it means the work is not scattered, and one well-built workflow may close most of the leak.

Do I need to track this in a tool?

No. A page of paper or a note is enough. The purpose is to see the pattern, not to build a system for recording it.

What if the cause is that nobody owns the step?

Name an owner first. A workflow without an owner is a process nobody is responsible for, so decide who is accountable before you decide what the rule does.

The full method, with the checklists, is in The Automation Playbook, a free 29-page playbook.

LG

Luis Goncalves

// Founder & CEO at FIKR Space

Three-time founder. Built and exited Evolution4All before this. Now building FIKR Space — the operating infrastructure underneath every innovation ecosystem (startups, accelerators, governments, investors). Lisbon-based, works global.

Claim your founding member spot.

Every founding member is hand-reviewed. Tell us who you are and how you want to co-create — we get back inside 48 hours.

Role
Job Title
Country
Cookies

We use cookies.

Essential ones keep the site working. The rest only run if you say so. No dark patterns, no pre-ticked boxes.Privacy policy

Co-create with us. It's about building it together.Co-Create With Us